Join our newsletter
Aluminate HF is considered corrosive and poisonous material. For your protection, wear safety attire when using Aluminate HF. Refer to Safety Data Sheet for specific safety information.
For heavily corroded surfaces: mix 1 part Aluminate HF with 4-6 parts water. Do not use a galvanized bucket. Wet the surface to be cleaned. Apply Aluminate HF solution with spray or brush. Work from the bottom up and only cover as much of the area as can be sufficiently handled and leave on surface for 3-5 minutes. Agitate with brush if necessary. Rewet the surface if corrosion and soil is heavy. Rinse thoroughly to avoid streaking. Do not allow product to dry on the surface. Do not apply product to hot surfaces.